New Antimicrobial Acetals Introduced

29 Aug


Editor’s Note: we generally don’t discuss injection molding topics but the fact that this grade of plastic exists is of interest.

Antimicrobial Polymers for Injection Molding and Extrusion

Ticona introduces family of antimicrobial acetals, Anti-Crobe polymers, that include injection molding and extrusion grades for hot, wet environments.

The growing concern over bacterial contamination in many settings has led Ticona, the engineering polymers business of Celanese Corporation, to introduce Anti-Crobe** Antimicrobial Polymers, a family of antimicrobial acetal copolymers (POM) that includes two injection molding grades and an extrusion grade. The line is targeted at applications calling for high performance polymers in environments where heat, moisture and nutrients foster bacterial and fungal growth.*

Anti-Crobe Antimicrobial Polymers from Ticona

Anti-Crobe Antimicrobial Polymers from Ticona.
Click Here for High resolution image. photo: Ticona

Evaluations of these grades, which are made with the company’s Hostaform** and Celco** POMs, found they greatly inhibit microbial proliferation compared to conventional acetal. The tests considered bacterial growth at 35°C (99°F) over 24 hours. One of the injection molded grades, Anti-Crobe AM90S Plus, gave a log 4 reduction in bacterial activity within 5 hours. The other injection molding grade, Anti-Crobe AM90S, had a similar action within 24 hours. These results indicate that Anti-Crobe AM90S Plus is suitable for rapid bacterial control, while Anti-Crobe AM90S is appropriate in less-demanding situations.

Evaluation of two Anti-Crobe acetals grades using the Efficacy Test Method JIS Z 2801 for microbe proliferation showed they greatly inhibited microbial growth compared to conventional acetal. The tests indicate that Anti-Crobe AM90S Plus is suitable for rapid bacterial control, while Anti-Crobe AM90S is appropriate in less-demanding situations. See photo at right. ->

“The advanced, inorganic antimicrobial formulation in these grades is present throughout the polymer matrix, not just on the surface, and does not migrate significantly,” says Davida Barrett, Technical Marketing. “This means that Anti-Crobe resins won’t abrade or scratch off, so they preserve product performance and service life by deterring bacteria and fungal attack that can cause odors, contamination, stains, biofilms and mechanical property loss.”

Anti-Crobe Antimicrobial Polymers comply with FDA regulations for direct food contact, meet the NSF 61 Potable Water standard, and satisfy applicable EPA regulations. They are naturally white and can be tinted as needed.

They retain all traditional physical and mechanical properties associated with Hostaform and Celcon POMs. For example, they have a tensile modulus of 2600 MPa, a flexural modulus of 2500 MPa, a tensile stress at yield of about 63 MPa, and a notched Charpy impact strength of 7 kJ/m2. They also have excellent resistance to chemicals and dimensional stability, are inherently lubricious, and withstand continuous exposure to hot water at 82°C (180°F) (and intermittent exposure to water at 100°C (212°F) or more).

Anti-Crobe POMs are suitable for many end uses, especially in hard-to-clean wet areas and where polyolefins cannot meet performance specifications. Their possible applications include food processing, storage and handling systems, industrial gears in wet environments, and elements in water treatment plants. Other potential uses include automotive heating and air conditioning systems, medical devices, appliances, spa and bathroom products, material handling systems, office products, sports equipment, and irrigation and other fluid-based systems.

* Anti-Crobe Antimicrobial Polymers do not protect users or others against disease-causing (or food-borne) bacteria. Antimicrobial properties apply to the molded part only. No public health claims are made with resins that have antimicrobial additives or the products that contain them.

** Hostaform, Anti-Crobe and Celcon are registered trademarks of Ticona or its affiliates.

Read a recent press release about – Bayer MaterialScience to exhibit a wide range of high-quality polymers products and applications at Khimia 2007 in Moscow

Leave a comment

Posted by on August 29, 2007 in General Knowledge, Mechanical Plastics


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: