source: http://guides.pimprig.com/modding/diy_acrylic_cement.php
Exerpt: Click On Link For Full Article
By Nick Pellis
If you ever need to glue two pieces of acrylic together for some reason (e.g. you are modding the ClearPC, making your own water reservoir for a cooling system, etc.) there really is no better cement to use than cement made from the material itself (not to mention it’s cheaper to make your own). You’ll need the following materials:
- Clean glass jar
- 4oz. Acetone (available in any hardware store)
- Scrap acrylic
- Time (At least 24 hours)
